Saturday, August 31, 2013

Lesson 11 : Tape measurmenets 4

Types of tapes



According to graduation

  • In metric or imperial units
  • Different location of zero mark
  • Least graduation interval
                Millimeters, centimeters, or decimeters           
         

 

Saturday, June 22, 2013

Lesson 10 : Tape measurmenets 3

Equipments used with taping

1) Plumb bob 
  • Used to ensure a horizontal reading is obtained .

2) Range poles 
  • painted alternately red and white .
  • Used as upright guides when chaining or marking turning points .

Types of tapes : great variety exists :

1) According to the material : 
  • steel and steel alloy 
  • metallic or non-metallic 
  • polymers 
  • Invar 
       1) nickle - steel alloy .
       2) with very low coefficient of thermal expansion .
       3) Used for precise measurements .


Lesson 9 : Tape measurmenets 2

Units of length :

1) Metric system 
  • Adopted as international system .
  • The meter is the length of the path traveled by light in vacuum during a time interval of 1/299792458 of a second .
2) Imperial ( English ) system : 
  • foot .
  • the popular belief is that original standard was the length of a man's foot .
  • the foot used today is the imperial foot , which is defined to be exactly 0.3048 meters .

Units of Area :

1) Imperial ( English ) system ; 
  • square foot , yard and inch 
  • 1 Acre = 43560 square feet 
2) Metric 
  • square meter , kilometer , decimeter , centimeter and millimeter .
  • 1 hectare = 10000square meters 



Lesson 8 : Tape measurmenets 1

Introduction

1) one of the fundamental operation in surveying is distance measurement  .
2) distance measurement can be done by :
  1. passing 
  2. wheels 
  3. taping 
  • also the term chaining is used .
  • the oldest instrument used is chain 
  • later on tape 
3) stadia method 
  • the distance is computed from angle measurements and staff readings .
4) electronic distance measurement - the most modern technique .


Lesson 7 : Taping

Taping 


Considered by many to be the most accurate of manual measurement . 

A crew of two persons are referred to as a head chainman and a rear chainman  

Accuracy of measuring with a tape come from knowing the equipment . 

Source of errors when taping 


  • Tape of incorrect length 

  • Tape not horizontal 

  • Incorrect alignment 

  • Random errors  



Lesson 6 : Sources Of Errors

 Sources Of Errors 

1) personal errors 

no surveyor has perfect senses of sight and touch 

2) Instrument errors 

devices cannot be manufactured perfectly wear and tear and 

compatibility with other components  .

3 ) Natural error 

temperature , wind , moisture , magnetic variation , etc .

4) Systematic error 

Known as cumulative errors .

Correction can be made to eliminate them .  


Lesson 5 : Conversions of unit of measuring

Conversions of unit of measuring 

As a student you must store these basic parameters in your mind to use it but in future you can used a lot of alternatives to convert between units 

  • 1 yard = 3 feet 
  • 1 meter = 39.37 inch = 3.2808 feet
  • 1 degree = 1/ 360 of the angle around a point  
  • 1 degree = 60 minutes 
  • 1 radian = 57.3 degrees 
  • 1meter = 100 cm = 1000 mm = 1.0936 yd 
  • 1 kilometer = 1000 m = 0.6214 mile 
  • 1 foot = 12 inch 
  • 1 mile = 1760 yd 
  • 1 hectare = 10000m square 
  • 1 square kilometer = 100 hectare 

This the most important point you can use in conversions . 





Lesson 4 : The methods and equipments used in measuring

 The methods and equipments used in measuring  

a variety of methods and equipments can be used to measure each of these parameters .

1)Horizontal distances by :
  • Taping .
  • Optical method .
  • Electronic methods  .

2)Vertical distances by : 
  • Taping 
  • Optical method 
  • Electronic methods  

3)Angles by :
  • Magnetic compass .
  • Sextant .
  • Theodolite .




Lesson 3 : Land surveying

 Land surveying


This area of surveying can be broken down into the following:
  • Geodetic surveying .
  • Topographical surveying  .
  • Photogrammetry.
  • Hydrographic surveying.
  • Cadastral surveying .
  • Engineering surveying .
We are going to concentrate on this last aspect although the basic techniques can be employed to most of the others .

Engineering surveying is used 

  •  at the concept and design stage for production of maps and plans .
  • at the construction stage for setting out and measurement .
  • at the post construction stage for measurement and monitoring .

surveying for all three aspects involves the measurement of three parameters :
  • Horizontal distances .
  • Vertical distances .
  • Angles .


 

Lesson 2 : Types of surveying

Types of surveying 

1) boundary and cadastral surveying 
  • Related to separation and mapping of property boundaries .
2) plane surveying 
  • concerns small area project and surveying work where earth curvature can be neglected .
3) Topographic surveying 
  • The third dimension - heights - is included .
4 ) Geodetic surveying 
  • concerns large area surveying works such as geodetic networks , etc . 
  • earth curvature is taken into account .
5) Engineering construction surveying includes surveying works needed for 
  • planning 
  • design
  • Implementation 
  • Monitoring 
6 ) Quantity surveying 
field works and computations related to determination of quantities :
  • cut 
  • fill
  • buildings materials , etc 



 
 

Friday, June 21, 2013

Lesson 1 : definition of surveying

 Definition
The simplest definition of surveying is that : 

The definition of surveying include these main points

1) earth measurement
  • distances : horizontal ,slope and vertical
  • angles :horizontal , vertical , zenith , azimuth     

2) determination of relative position of points located on above or below the earth's surface

3) The final output is positional information as :
  • maps : digital or paper 
  • Coordinates 
  • Features  

preface

preface 

Before I started , I want to tell the visitors of this blog why I want to write about this subject exactly ( surveying in civil engineering ) , the reason is that when I was student the surveying course was very complicated respect to me so now I will try to make this course easy for all Civil Engineering students in the world
After I studied this course hard and got high mark in it I will write about it , surveying  in civil engineering now is the most interesting subject for me
In this blog I will make simple lessons in this aspect , the goal is to help you .  If you have any question about this subject send a question for me on this email .

Sami Alhalabi